An absolute filter rated to 0.01 micrometres and suitable for the removal of turbidity, bacteria viruses and cryptosporidium from your water supply - requires pressure to force water through the membrane
For the removal of chlorine, and improvement of taste and odour for flow rate of up to 2.5 litres per minute. Service life - one year
A 5 micron depth filter to guard against particles of rust and scale in your drinking water. Suitable for supplying a single tap. Ideal for old properties with pipes in poor condition. Will NOT remove chlorine or bacteria or other pathogens
A 5 micron carbon block that will filter out rust and scale particles and also reduce chlorine for taste improvement
For more complete removal of chlorine - a 10" cartridge containing loose granular activated carbon. This is the same carbon used by water companies for the removal of pesticides from drinking water
A 5 micron depth filter to guard against particles of rust and scale in your drinking water. Suitable for supplying multiple taps. Ideal for larger old properties with pipes in poor condition. Will NOT remove chlorine or bacteria or other pathogens
For complete removal of chlorine - a 20" cartridge containing loose granular activated carbon. Suitable for feeding multiple taps.
A extra large carbon filter for large properties or equipment where high flow rate is required
A DIY option for those requiring RO water at low cost. A 300 GPD RO membrane plus carbon prefilter and all required connections - see our shop listing for more details
A four stage reverse osmosis system with pump. These fully automatic systems can produce 15 litres per hour of pure RO water all day long. For full details see our shop listing.
A 5 stage reverse osmosis system with pump. Can produce 2000 litres of RO water in a single day. Post treatment options available - see our shop for further details
* Local TAP WATER tds VALUES VARY SIGNIFICANTLY ACROSS THE COUNTRY AND CAPACITIES WILL BE HIGHER IN AREAS WITH LOW MINERAL CONTENT OF THE TAP WATER